Professional Edm Wire Cutting Supplier
FARWARDER has 5 EDM wire cutting equipment, with positioning accuracy of ±0.005mm, surface roughness Ra≤0.4μm, and maximum machining efficiency of 400～500㎜²/min, covering 90% of EDM wire cutting product machining needs.
FARWARDER developed a self-developed Excel parameter library covering more than 30 material parameters, which not only reduced the trial-cutting time but also increased the machining efficiency by 20%.
FARWARDER can process slots with a depth of 10:1 and micro-holes with a diameter of 0.1mm. It can also process holes with different shapes, etc. Our workshop is always kept at 20±2℃ and humidity at 40%~60% to ensure that the accuracy is not lost. Our scrap rate is kept below 0.5%. Please feel free to find us for wire EDM machining.
Product by Features
FARWARDER’s wire EDM can process circles, ovals, irregular shapes and other high-precision cutting to ensure the product’s appearance and size are accurate, surface finish and precision.
Products by Material
FARWARDER’s wire EDM can process high-hardness, high-melting-point conductive materials, special shapes, and precision parts, and can achieve fine cutting of materials, thereby meeting the strict requirements of the design drawings and ensuring the dimensional accuracy and surface quality of the parts.
EDM Wire Cutting of Die Steel Parts（Dievar）
EDM Wire Cutting of Die Steel Parts（M333）
EDM Wire Cutting of Die Steel Parts（M310）
Wide Range of Industry Product Applications
FARWARDER’s EDM wire cutting involves multiple industry products. If you need to process complex and precise metal parts, such as gears, bearings, guide rails, connectors, etc., please contact us. Our EDM wire-cutting equipment capabilities and process technology can serve your products well.
Able to Process a Variety of Materials
FARWARDER’s EDM wire cutting machining tolerance can reach ±0.002mm, which is suitable for precision molds, etc. The surface roughness can be controlled at Ra0.1~Ra0.4μm. It can process hardened steel, cemented carbide, titanium alloy, and other high-hardness and high wear-resistant materials, and is the ultimate choice for complex materials.
Combined Machining Available
FARWARDER has complete EDM wire-cutting equipment, including medium wire and slow wire. When rough machining is required, medium wire is used to quickly remove the excess, and then slow wire is used for fine finishing, which can quickly improve efficiency reduce costs, and deliver products to you in a timely manner.
Difficult chip removal, easy wire breakage and deterioration of surface roughness can be effectively avoided by adjusting parameters every 50mm and performing segmented cutting.
Yes, through the composite machining technology of laser pre-drilling + EDM finishing, it can be used to process ceramics, glass, etc.
The cost is calculated based on working hours or area. Normally, the cost for ordinary steel parts is 80-150 yuan/hour, and the cost for hard alloy parts is 200-350 yuan/hour.
